How to Connect Smart Plug to Wi-Fi

0 Shares
0
0
0

Smart plugs are all the rage these days, and for good reason. They make everyday home automation easy by allowing you to control devices from anywhere in the world with a smartphone app or voice command. But how do they connect to Wi-Fi? Read more about that below!

The “how to connect smart plug to wifi” is a question that has been asked many times. This article will show you how to connect your smart plug to Wi-Fi.

How to Connect Smart Plug to Wi-Fi

Before You Begin, Here’s How to Connect a Smart Plug to Wi-Fi.

Connecting a new smart plug to your home Wi-Fi network is the first step towards getting it up and running.

This technique varies depending on the smart plug manufacturer, but it typically follows the same fundamental stages.

The smart plug has a function that allows it to connect to your home Wi-Fi network, but it won’t join unless you give it your network name and password.

It does, however, broadcast a Wi-Fi hotspot to link your smartphone to the smart plug and provide those facts to your phone.

This evaluation is for standalone smart plugs that connect directly to Wi-Fi networks.

In addition, if your smart plug comes with a bridge, the identical setup instructions will apply to the hub rather than the smart plug.

The Procedure for Setup

  1. You’ll need to download the Kasa app on your Android or iOS smartphone to begin the setup procedure. This is the companion app for TP-smart Link’s home devices.
  2. Launch the program when it has been installed and choose ‘Create Account.’

How to Connect Smart Plug to Wi-Fi How to Make a Wi-Fi Connection with a Smart Plug

  1. Click ‘Create Account’ after entering your email address and creating a PIN.
  2. To continue, you must validate your email address. Open your email inbox and double-click the email you received, then click the verification link. When you’re finished, return to the Kasa app and tap the ‘Continue’ option.

How to Connect Smart Plug to Wi-Fi How to Make a Wi-Fi Connection with a Smart Plug

  1. Next, determine whether or not you wish to grant the app location access. This will enable you to program the plug to turn on and off according to the dawn and sunset times. There’s no need to allow the app access to your location if you don’t want to make timetables.
  2. You’ll now be transported to the main screen of the app. To set up the smart plug, go to the upper-right corner of your screen and click the addition (+) icon.

How to Connect Smart Plug to Wi-Fi How to Make a Wi-Fi Connection with a Smart Plug

  1. Select the device you wish to set up from the list by scrolling down.
  2. Connect your smart plug to a power outlet and wait for it to turn on; it should only take a few seconds. The Wi-Fi symbol should flicker between orange and green and have an orange glow. Click the ‘Next’ button twice when you see this.

How to Connect Smart Plug to Wi-Fi How to Make a Wi-Fi Connection with a Smart Plug

  1. Now you must go into your phone’s Wi-Fi settings and join to the Wi-Fi network that the smart plug is broadcasting.
  2. Return to the Kasa app and name the smart plug after you’ve connected to the plug’s Wi-Fi network. Click ‘Next’ after entering any name you like.

How to Connect Smart Plug to Wi-Fi How to Make a Wi-Fi Connection with a Smart Plug

  1. Choose an icon for your smart plug; this isn’t necessary, but it’s entertaining. You may also choose a picture from your camera roll to serve as a visual reminder of the device you’re operating. Press the ‘Next’ button after selecting the icon you desire.
  2. Connect the smart plug to your home network through Wi-Fi. To do so, enter the passcode for your network and then click ‘Next.’ Click ‘I’d like to use a different network’ at the bottom of your screen if you wish to join a network other than the one the app suggests.

How to Connect Smart Plug to Wi-Fi How to Make a Wi-Fi Connection with a Smart Plug

  1. The smart plug must download the newest firmware version from TP-website Link’s after connecting to your Wi-Fi. To do so, click the ‘Update’ button.
  2. Allow a few minutes for the updates to download and install. You may see the smart plug turning on and off on its own during this time.

How to Connect Smart Plug to Wi-Fi How to Make a Wi-Fi Connection with a Smart Plug

  1. Click ‘Done’ when the update is complete.
  2. Then click ‘Done’ once again.

How to Connect Smart Plug to Wi-Fi How to Make a Wi-Fi Connection with a Smart Plug

  1. Your smart plug should now display on the app’s main page, and you can turn it on and off by clicking the power button to the right of the device’s icon.
  2. More information about the smart plug’s use is shown by clicking on its symbol.
  3. More information on how long the plug has been on is available by clicking on ‘Total Runtime,’ which also includes 7-day and 30-day totals and averages.
  4. The Kasa Smart Plug delivers runtime information, which is similar to what other smart plugs provide. Unfortunately, this information isn’t as comprehensive as that provided by other smart plugs. But it’s better than nothing, and this software is simple to use.

How to Connect Smart Plug to Wi-Fi How to Make a Wi-Fi Connection with a Smart Plug

Last Thoughts

To summarize, if you follow the procedures outlined above, connecting a smart plug to Wi-Fi is pretty simple.

However, since most smart plugs utilize a 2.4 GHz Wi-Fi channel, they will most likely not work if you connect them to a 5 GHz Wi-Fi band.

Unresponsive Amazon Smart Plug

Setup of the TP-Link Smart Plug

How to Make a Smart Plug Work with Alexa

Google Home’s Best Smart Plug

How to Connect Alexa to the Internet through Wifi

How to Make a Wi-Fi Connection with a Smart Plug

Watch This Video-

The “tp-link smart plug app” is a free application that can be downloaded to connect the smart plug to Wi-Fi.

Frequently Asked Questions

How do I connect my smart plug to Wi-Fi?

A: In order to connect your smart plug to Wi-Fi, youll need an Ethernet cable.

How do I setup my smart plug?

A: In general, you can set it up in the app. Instead of plugging your smart switch into a wall outlet and then connecting to it with the devices Wi-Fi adapter or by opening an account on whatever platform makes use of that virtual network, you will have to do so through the Beat Saber app first.

Why is my smart plug not connecting?

A: You may need a newer smart plug. A simple way to check this is by connecting your android or iphone and checking the app store for Smartplug apps, if you dont see any that are compatible with your model of outlet then use the search function on this listing.

  • smart plug won’t connect to wifi
  • how to connect kasa smart plug to new wifi
  • kasa smart plug won’t connect to wifi
  • kasa smart plug change wifi
  • reset tp-link smart plug
0 Shares
You May Also Like